Small Flat Rate Satchel

Auspost Flat Rate

  • Radius Master Small Wheels

    Radius Master Small Wheels

    Contact wheels are the heart of the Radius Master system. Each diameter produces a distinctly different grinding profile — from the sharp, tight inside radius of the 19mm wheel through to the broad, gentle sweep of the 50mm. Having the right wheel for the job means the difference between a grinding pass that takes seconds and one that requires multiple compromises with the wrong profile.

    These small wheels are 50mm wide, matching the 50 x 1220mm (2″ x 48″) belt used by the Radius Master and Blade Master machines. All wheels feature a smooth rubber surface for consistent belt contact and clean, controlled grinding across the full belt width.

    What’s included varies by size:

    • 19mm, 22mm, 25mm, 32mm, and 38mm wheels — supplied complete with bearings and mounting screws, ready to install directly onto the machine’s contact wheel spindle.
    • 44mm wheel — contact NIROC to confirm inclusions.
    • 50mm wheel — supplied with the shaft included, as this size mounts differently to the smaller wheels.

    Each size opens up specific grinding capabilities:

    • 19mm — extreme tight radius work; finger choils, deep narrow grooves, fine detail on jewellery and instrument work. Variable speed grinders only at medium-low speed; monitor bearing temperatures.
    • 22mm — tight radius choils and inside curves with slightly more belt surface contact than the 19mm.
    • 25mm — the smallest wheel in the standard RM-48 kit; a versatile tight-radius option for knife choils, fuller entry points, and precision notch work.
    • 32mm — mid-small radius; useful for moderate inside curves, guard fit-up, and handle shaping.
    • 38mm — approaching mid-range; good for fuller grinding, sweep blending, and larger choil work.
    • 44mm — larger small wheel; smooth sweep grinding on blades and curved stock.
    • 50mm — a full 2″ diameter contact wheel; popular in the Three-Wheel Cluster assembly and as a standalone grinding station for medium-radius hollow grinds and profiling.

    These wheels are fully compatible with the Three-Wheel Cluster Upgrade Kit — if you own a cluster, individual small wheels are available as replacements when a wheel in your cluster is worn.

    Company Information

    Genuine Radius Master contact wheels are manufactured by NIROC, the Australian company that acquired Radius Master Machinery in 2025 and continues to build and supply the full Radius Master range. NIROC’s lead maker, Corin Urquhart, is a practising knifemaker with over 20 years of daily belt grinder use — the parts and accessories NIROC supplies are designed and validated by people who depend on them in real workshop conditions. All wheels are manufactured to match the original specification for fit, rubber durometer, and bearing quality.

    Features & Specifications

    FeatureSpecification
    MakeRadius Master / NIROC
    Product NameSmall Contact Wheels — 50mm Wide
    Part TypeGenuine OEM contact wheel
    Width50mm (suits 50 x 1220mm belt)
    Available Diameters19mm, 22mm, 25mm, 32mm, 38mm, 44mm, 50mm
    SurfaceSmooth rubber
    Compatible MachinesRadius Master RM-48, RM48AE-VS (Series 2); Blade Master belt grinders
    Also compatible withThree-Wheel Cluster Upgrade Kit (as replacement wheels)
    19–38mm inclusionsComplete with bearings and mounting screws
    50mm inclusionsSupplied with shaft
    Country of OriginAustralia

    Further Information

    Choosing the Right Size

    If you are replacing a worn wheel, match the diameter of your existing wheel. If you are adding a new size to your setup, consider where the gaps are in your current contact wheel range. The standard RM-48 kit includes 25mm, 38mm, 44mm, 50mm, and 88mm wheels — meaning 19mm and 22mm are the sizes most commonly added by knifemakers seeking tighter radius capability for choil and detail work.

    Variable Speed Note for Very Small Wheels

    The 19mm and 22mm wheels spin at significantly higher RPM than larger wheels for any given belt speed, which increases bearing load and heat generation. These very small wheels are best used with a variable speed machine (RM48AE-VS) at medium to low belt speeds. Monitor bearing temperatures when first using these wheels in your workflow, particularly during extended grinding sessions.

    Compatibility with Three-Wheel Cluster

    If you own the Radius Master Three-Wheel Cluster Upgrade Kit, individual wheels from this range can be used as cluster replacement wheels when one of the cluster wheels becomes worn or damaged — extending the service life of your cluster assembly.

  • Yamawa Centre Point Drill 1mm x 90°

    Yamawa Centre Point Drill 1mm x 90°

    Yamawa Centre Drill – 1 mm × 90° (High-Helix, Type A)

    A Yamawa precision centre (center) drill, designed for accurate centering and pilot hole creation. Manufactured in Japan, this tool combines high-quality HSS material with precise geometry for durability and accuracy in metalworking applications.

    Specifications

    • Manufacturer: Yamawa (Japan)
    • Model Series: CE-S, Type A (High Helix)
    • Drill Diameter (Dc): 1.0 mm
    • Shank Diameter (Ds): 4 mm
    • Overall Length (L): 40 mm
    • Drill Point Length (ℓ): ~1.0 mm
    • Tip Angle (θ): 90°
    • Material: High-Speed Steel (HSS)
    • Weight: ~5 g

    Features

    • High-Helix Geometry – improves chip evacuation for cleaner, smoother drilling.
    • 90° Point Angle – ideal for countersinking, spotting, and chamfering.
    • Compact Precision – 1 mm diameter, perfect for fine and detailed centering tasks.
    • Durable Build – made from premium HSS for extended tool life.
    • Japanese Quality – engineered for repeatable accuracy and reliable performance.
  • Iscar 26mm Parting Blade Block SGTBN 19-5

    Iscar 26mm Parting Blade Block SGTBN 19-5

    Product Overview

    The Iscar SGTBN 19-5 is a heavy-duty, solid-construction Parting Blade Tool Block, designed to rigidly clamp indexable cutoff and grooving blades for CNC turning centers and manual lathes.

    • One-Piece Rigidity: Unlike adjustable or multi-piece holders that can introduce flex, this block features a solid, one-piece body design. This maximizes vibration dampening and rigidity, which is absolutely critical for achieving clean finishes and preventing chatter during deep parting operations.
    • Secure 3-Bolt Clamping: The blade is locked into place using a robust 3-bolt clamping mechanism. This ensures even pressure across the blade shank, preventing it from slipping or pivoting under heavy cutting loads.
    • Custom 26mm Adaptation: The block’s native shank size is 19mm. However, this specific unit features a custom-fitted, screw-on extension plate that perfectly builds the shank out to fit securely into a 26mm toolpost. This gives you the versatility of a larger mount without sacrificing the block’s inherent strength.

    Condition

    Used (Patina / No Major Damage).

    This tool holder is in well-used condition and wears the visual patina of a veteran shop-floor tool.

    • Structural Integrity: Despite the cosmetic aging and surface wear, there is no major damage. The blade pocket is clean, the clamping threads are intact, and it has not suffered any catastrophic crashes that would compromise its rigidity or holding power.

    Brand Information

    Iscar (Israel) is a global leader in metal removal technology and the undisputed pioneer of modern parting and grooving systems. Their SGTBN series tool blocks are legendary in the machining industry for their robust steel construction and ability to handle high-feed production environments day in and day out.

    Specifications

    FeatureSpecification
    BrandIscar
    ModelSGTBN 19-5
    TypeSolid Parting Blade Block
    Native Shank Size19mm
    Adapted Shank Size26mm (via attached spacer plate)
    ConstructionSolid One-Piece
    Clamping Mechanism3-Bolt Lock
    ConditionUsed / Patina / Fully Functional

    Keywords

    Iscar SGTBN 19-5, parting blade block, parting tool holder, 19mm tool block, 26mm toolpost, cutoff blade holder, solid parting block, CNC lathe tooling, Iscar Self-Grip.

  • Sandvik 26mm Parting Blade 151.2-21-30

    Sandvik 26mm Parting Blade 151.2-21-30

    Product Overview

    This is a premium Sandvik Coromant 151.2-21-30 T-Max Q-Cut parting and grooving blade. It is engineered for high-efficiency parting off, deep grooving, and face grooving operations on CNC lathes.

    • Blade Dimensions: The blade features a highly rigid 25.9mm height (commonly referred to as a 26mm blade in the shop). This makes it perfectly sized to slip into standard heavy-duty parting blocks. It provides an impressive maximum cutting depth (overhang) of 35mm.
    • Seat Size 30: It is designed to accept standard size “30” Q-Cut inserts (which feature an approximately 3mm cutting width). This is the industry standard size for stable, efficient metal removal without wasting excess material.
    • Double-Ended Design: This blade features an insert pocket on both ends. If an operator ever happens to crash or deform one pocket during a heavy cut, you can simply flip the blade around and keep machining, effectively giving you two tools in one.

    Condition

    New (Unused).

    This parting blade is in brand-new, unused condition. The insert pockets are pristine and factory-perfect, ensuring your carbide inserts will seat with maximum rigidity and zero chatter.

    Brand Information

    Sandvik Coromant (Sweden) is the undisputed global heavyweight in carbide cutting tools and tooling systems. Their T-Max Q-Cut parting blades are the benchmark for high-volume CNC production, prized for their exceptional steel metallurgy that dampens vibration and drastically extends insert life.

    Specifications

    FeatureSpecification
    BrandSandvik Coromant
    Model151.2-21-30
    TypeT-Max Q-Cut Parting Blade
    Shank Height25.9mm (Nominal 26mm)
    Max Cutting Depth35mm
    Insert Seat Size30 (approx. 3mm width)
    Overall Length110mm
    DesignDouble-Ended

    Keywords

    Sandvik Coromant, 151.2-21-30, T-Max Q-Cut, parting blade, 26mm parting blade, grooving blade, CNC lathe tooling, double ended blade, size 30 insert blade.

  • Nikken Test Indicator Magnetic Base

    Nikken Test Indicator Magnetic Base

    Condition: Used – in good working order. Both the Nikken indicator arm and Kanetec MB-B magnetic base show signs of prior use but operate smoothly. Accurate clamping and reliable magnetic holding force.
    Locking knob has some marks. Please see photos.

    Product Overview

    This setup pairs a Nikken precision indicator arm with a Kanetec MB-B switchable magnetic base, creating a versatile and stable support system for dial indicators and test indicators.

    The Nikken arm features an 8 mm mounting hole, dovetail clamp, fine adjustment knob, and a single central locking knob that secures all joints at once, allowing quick and repeatable positioning. Paired with Kanetec’s MB-B base, which delivers strong on/off magnetic holding power, the system is ideal for machinists, toolmakers, and inspectors performing precision measurement or machine setup tasks.

    Features & Specifications

    SpecificationDetail
    Indicator Arm BrandNikken
    Mounting Options8 mm stem holder, dovetail clamp
    AdjustmentFine adjustment knob for sensitive alignment
    Locking MechanismOne-knob system locks all articulations simultaneously
    Base Brand / ModelKanetec MB-B magnetic base
    Magnetic Base TypeSwitchable on/off permanent magnet
    Holding ForceStrong clamping force suitable for shop-floor measurement setups
    ApplicationsSupports dial indicators and test indicators for machining, inspection, and metrology
    Condition NotesUsed; cosmetic wear but fully functional and stable in operation

    Keywords

    Nikken indicator arm, Kanetec MB-B magnetic base, switchable magnet stand, precision indicator holder, machinist inspection tool, dial indicator support.

  • Radius Master Platen Table

    Radius Master Platen Table

    Radius Master Platen Table

    A genuine OEM replacement or spare platen table designed specifically for the Radius Master linisher. If your existing platen has picked up wear, warping, or heat damage from hard use, this is a direct-fit solution that restores a flat, stable reference surface to your belt grinding station — no fabrication, no guesswork on fitment.

    • Flat work support surface — provides a consistent backing platform behind the belt, critical for achieving even material removal and controlled finishes when grinding flat stock or workpiece faces.
    • Direct OEM fitment — engineered to suit the Radius Master linisher specifically, meaning no modification required for mounting; drop-in replacement keeps your machine downtime minimal.
    • Compatibility — suits the Radius Master linisher range; verify your specific model variant before ordering if you’re running an older machine.
    • Ideal for — knife grinding, tool blank profiling, flat surface finishing, and deburring operations on the Radius Master belt linisher.

    Condition

    New

    Included:

    • 1 x Radius Master Platen Table

    Brand Information

    Radius Master is an Australian-designed and manufactured brand producing belt linishers and associated accessories built for serious workshop use — knife makers, toolmakers, and fabricators rate them for their robust construction and practical design. As a locally developed product, parts availability and support are straightforward for Australian buyers. Accessories and spare parts are purpose-engineered to fit, not adapted from generic components.

    Specifications

    FeatureSpecification
    BrandRadius Master
    TypePlaten Table
    CompatibilityRadius Master Linisher
    Country of OriginAustralia
    ConditionNew (Factory Sealed)
    Included1 x Platen Table

    Keywords

    Radius Master platen table, Radius Master linisher accessory, belt linisher platen, linisher replacement table, belt grinder platen, Radius Master spare parts, linisher work table, belt sander platen Australia, knife grinder platen, workshop linisher parts

  • Radius Master Fixture Table & Multi Application Work-rest.

    Radius Master Fixture Table & Multi Application Work-rest.

    Most belt grinder accessories are purpose-built for a single task. The Radius Master Multi Table is different — it’s a multi-application platform designed to support workpieces, mount fixtures, and provide stable grinding references across several stations on the RM-48. The result is a single accessory that earns its place in the workshop by solving multiple problems at once.

    The Multi Table mounts to the Radius Master frame and provides a flat, rigid work surface that can be positioned and locked at the angle and height required for your task. Its broad surface area supports longer workpieces — full-length knife blanks, bar stock, and plate — that would otherwise be unsupported during grinding. It also serves as a mounting platform for jigs and fixtures, making it valuable for production knife makers, toolmakers, and anyone who needs to repeat the same grinding operation accurately across multiple parts.

    As a workrest, the Multi Table keeps your workpiece at a consistent height and angle relative to the belt, reducing the hand fatigue and technique variation that comes from freehand grinding over extended sessions. For users who find themselves spending time compensating for workpiece drift or re-establishing grinding angles pass after pass, a solid mechanical reference surface like the Multi Table is a significant upgrade in consistency and efficiency.

    Key uses include:

    • Supporting full-length knife blanks during primary bevel grinding
    • Providing a flat reference surface for flat-grind geometry
    • Mounting custom jigs and fixtures for repeatable production work
    • Supporting bar stock and plate during surface finishing and de-burring
    • Workrest for extended grinding sessions to reduce fatigue and improve consistency
    • Multi-position setup for sequential operations without repositioning the workpiece

    Company Information

    The Multi Table is designed and manufactured by NIROC, the Australian company that acquired Radius Master Machinery in 2025 and continues to develop and produce the full Radius Master accessory range from Australia. NIROC’s approach to accessories is shaped by real workshop experience — their lead maker, Corin Urquhart, has over 20 years of daily knifemaking and metal grinding practice, and the accessories NIROC develops are designed to solve problems that working craftspeople actually face. The Multi Table is a NIROC-exclusive product, available directly through NIROC and authorised Radius Master dealers.

    Features & Specifications

    FeatureSpecification
    MakeRadius Master / NIROC
    Product NameMulti Table / Fixture Table / Multi-Application Workrest
    Compatible MachinesRadius Master RM-48, RM48AE-VS (Series 2)
    FunctionMulti-position work table, fixture mounting platform, adjustable workrest
    SurfaceFlat, rigid — suitable for jig and fixture mounting
    AdjustabilityMulti-position; adjustable angle and height
    Workpiece SupportSuitable for long stock including full-length knife blanks
    Country of OriginAustralia

    Further Information

    Why a Fixture Table Changes Your Workflow

    There’s a clear difference between grinding freehand and grinding with mechanical support. Freehand technique is flexible and valuable, but for operations that need to be repeated consistently — same bevel angle, same grind height, same finish quality on every blade — mechanical support is what makes the difference between a good craftsperson and a consistent production operation.

    The Multi Table gives you that mechanical support without locking you into a single application. By adapting to different positions and configurations, it supports the variety of work that a typical RM-48 owner actually does: sometimes flat grinding, sometimes supporting long blades at the contact wheel, sometimes running a jig for a specific profile.

    For Production Knifemakers

    If you’re making more than a handful of knives at a time, consistency between pieces is critical — for quality, for reputation, and for your own efficiency. A fixture table that holds your blade at a set height and angle means the 20th bevel of the day looks like the first, regardless of fatigue. The Multi Table is the practical answer to this problem on the Radius Master platform.

    Combining with Other Accessories

    The Multi Table works independently but pairs particularly well with the Hollow Grinding Jig (RM-HGJ) for blade support during hollow grinding, and with the Platen Table (PT-48) for flat grinding workflows. If you’re building out a complete production setup on the RM-48, the Multi Table is a foundational piece of that system.

  • Radius Master Replacement Platen Assembly

    Radius Master Replacement Platen Assembly

    The platen assembly is one of the most heavily used components on any belt grinder. Every time you grind flat bevels, dress a surface, or finish flat bar stock, the belt is running against the platen face — and over time, that face wears. On the Radius Master, the platen sits behind the belt run between the drive wheel and the top tracking wheel, providing a firm, flat backing surface for controlled straight grinding passes.

    A worn or damaged platen shows up quickly in your work: flat grinds develop a hollow or crowned profile, bevel angles become harder to hold consistently, and fine finishing passes leave uneven scratch patterns. In some cases the platen backing material can develop grooves or delamination from abrasive belt tracking issues or heavy use.

    The Radius Master Replacement Platen Assembly is manufactured by NIROC to the original specification — correct material, correct dimensions, correct mounting geometry for the Series 2 belt head. It fits the RM-48 and RM48AE-VS directly, with no machining or modification required.

    Signs your platen needs replacing:

    • Flat grinds developing an unintended hollow or crown
    • Uneven surface finish across the width of a flat grinding pass
    • Visible wear grooves or depressions in the platen face
    • Platen backing material cracking, delaminating, or separating
    • Inconsistent bevel angles despite consistent hand technique
    • Belt running hot in the platen zone due to increased friction from surface irregularity

    Replacing the platen assembly is straightforward and is one of the most effective ways to restore flat grinding performance on an RM-48 that has seen heavy use.

    Company Information

    This is a genuine spare part manufactured by NIROC, the Australian company that acquired Radius Master Machinery in 2025. NIROC maintains a complete spare parts programme for the full Radius Master range — from wear items like the platen assembly and tracking wheel through to drive wheels and electrical components — ensuring that every Radius Master machine can be kept in full working order for its rated 20-year design life. Parts are available directly through NIROC (niroc.com.au) and authorised Radius Master dealers.

    Features & Specifications

    FeatureSpecification
    MakeRadius Master / NIROC
    Product NameReplacement Platen Assembly
    Part TypeGenuine OEM spare part
    Compatible MachinesRadius Master RM-48 Series 2, RM48AE-VS Series 2
    FunctionFlat belt backing surface for straight bevel and surface grinding
    Belt Compatibility50 x 1220mm (2″ x 48″)
    InstallationDirect replacement — fits Series 2 belt head without modification
    Country of OriginAustralia

    Further Information

    Platen Grinding — Why the Surface Matters

    Unlike contact wheel grinding where the rubber surface has natural give, platen grinding presses the belt against a rigid, flat face. This makes the platen the most unforgiving station on the machine — any deviation from flat in the platen surface translates directly into the workpiece. A fresh, true platen makes flat bevel grinding significantly easier and more consistent, reducing the need for corrective passes and producing a cleaner, more uniform scratch pattern.

    Platen Assembly vs. Platen Table (PT-48)

    These are two distinct products. The Platen Assembly is an internal machine component — the structural backing surface inside the belt head that the belt runs against during flat grinding. The Platen Table (PT-48) is a separate work-support accessory that mounts externally and supports your workpiece during platen grinding. Both are available as genuine NIROC parts.

    Scheduled Maintenance Tip

    If you’re replacing the platen assembly, it’s a good opportunity to inspect the belt head for general wear — particularly the tracking wheel, belt tension spring, and any plastic or rubber components in the belt path. NIROC supplies all of these as individual spare parts, and a combined inspection during a platen replacement keeps downtime to a minimum.

  • Sandvik Coromant PCLNR 2525M 12

    Sandvik Coromant PCLNR 2525M 12

    Product Overview

    This listing features a premium Sandvik Coromant PCLNR 2525M 12 external turning tool holder, paired with a brand new pack of 10 Mitsubishi Diaedge CNMG 120404-GK inserts.

    This is a top-tier setup for general turning, facing, and profiling on a lathe, combining a world-class Swedish tool body with elite Japanese carbide.

    • The Tool Holder (PCLNR 2525M 12): A heavy-duty Right-Hand turning tool with a rigid 25mm x 25mm shank. It features a 95° approach angle, which allows you to turn along the Z-axis and face a perfect 90° square shoulder at the bottom of a cut. It uses the highly secure “P-Type” lever lock mechanism to pull the negative insert firmly into the pocket.
    • The Inserts (CNMG 120404-GK): Included is a full pack of 10 genuine Mitsubishi Diaedge inserts.
      • The 04 corner radius (0.4mm) is slightly sharper than the standard 0.8mm radius, meaning it requires less tool pressure. This makes it excellent for achieving fine surface finishes and reducing chatter on smaller diameter workpieces or less rigid setups.
      • The -GK chipbreaker geometry provides excellent chip control across a variety of general machining applications.

    Condition

    New (Holder + Inserts).

    • Holder: Brand new in its original Sandvik Coromant plastic sleeve/tube.
    • Inserts: Brand new, sealed pack of 10 Mitsubishi Diaedge CNMG 120404-GK inserts.

    Brand Information

    Sandvik Coromant (Sweden) and Mitsubishi Materials / Diaedge (Japan) are two of the most respected names in the CNC machining world. Sandvik tool holders are renowned for their hardened steel pockets that resist wear, while Mitsubishi Diaedge carbide provides incredibly consistent tool life and performance.

    Specifications

    FeatureSpecification
    Holder BrandSandvik Coromant (Sweden)
    Holder ModelPCLNR 2525M 12
    Shank Size25mm x 25mm
    HandRight Hand
    Approach Angle95°
    Clamping SystemLever Lock (P-Type)
    Included Inserts10 x Mitsubishi CNMG 120404-GK
    Insert Corner Radius0.4mm

    Keywords

    Sandvik Coromant, PCLNR 2525M 12, right hand turning tool, 25mm lathe tool, Mitsubishi Diaedge, CNMG 120404, CNMG inserts, CNC turning, machinist tools, Japanese carbide.

  • Sumitomo SBN 20-26 Lathe Parting Tool Block

    Sumitomo SBN 20-26 Lathe Parting Tool Block

    The Sumitomo SBN 20-26 is a heavy-duty Tool Block designed for mounting standard parting, grooving, and cut-off blades securely on your lathe.

    Just like the industry-standard Iscar blocks, this modular system provides maximum rigidity for thin cut-off blades by clamping them across a large surface area. This eliminates the vibration and chatter that often plague deep parting operations.

    • Shank Size: Features a standard 20mm functional shank height, making it a perfect fit for 20mm turrets or appropriately sized quick-change tool posts (such as a BXA or CXA).
    • Blade Compatibility: Designed to accept standard 26mm tall blades (such as the size 26 blades from Sumitomo, Iscar, Korloy, and others).
    • Adjustable Overhang: The block allows you to slide the blade in and out to set the exact overhang required for the diameter of your workpiece, ensuring you only extend the blade as far as absolutely necessary for maximum strength.

    Condition

    Used (Great Condition).

    This tool block is in great used condition. Crucially, there are no signs of crashing, rubbing, or spun workpieces on the face of the block. The clamping mechanics are tight, and the jaw faces remain clean to provide a solid, flat grip on your blades.

    Brand Information

    Sumitomo Electric Hardmetal (Japan) is one of the world’s elite carbide tooling manufacturers. Known for their exceptional steel quality and precise machining tolerances, a genuine Sumitomo block will not stretch, warp, or strip its clamping threads under heavy loads like cheaper, generic alternatives.

    Specifications

    FeatureSpecification
    BrandSumitomo (Japan)
    ModelSBN 20-26
    TypeParting & Grooving Blade Block
    Shank Height20mm (0.787″)
    Accepts Blade Height26mm
    Overall LengthApprox. 80mm (3.149″)
    CoolantNon-Coolant
    IncludedBlock Only (Blade not included)

    Keywords

    Sumitomo SBN 20-26, parting tool block, grooving blade holder, cut-off tool block, 20mm lathe tool, 26mm blade holder, Japanese lathe tooling, machinist tools.

  • Iscar SGTBN 16-5 Lathe Parting Tool Block

    Iscar SGTBN 16-5 Lathe Parting Tool Block

    The Iscar SGTBN 16-5 is a dedicated Tool Block designed to hold parting, grooving, and cut-off blades securely on a lathe.

    Because parting blades are thin and often extended deep into a cut, they are highly susceptible to vibration and chatter. This block clamps the blade rigidly across a large surface area, providing the necessary stability for clean, heavy-duty cut-off operations.

    • Shank Size: Features a 16mm x 16mm (approx. 5/8″) square shank. This makes it an ideal fit for standard quick-change tool posts (like AXA or BXA sizes) or conventional 4-way turrets.
    • Blade Compatibility: Designed to accept standard 26mm (1.024″) tall blades. This accommodates a huge variety of genuine Iscar blades (such as the SGIH 26 series or TGFH 26 series) as well as generic 26mm/1-inch parting blades from other manufacturers.
    • Versatility: By using a block-and-blade system rather than a solid one-piece tool, you can easily adjust the overhang of the blade within the block to suit the specific diameter of the material you are parting, ensuring maximum rigidity for every job.

    Condition

    Used.

    This tool block is in used condition. As with all used tool blocks, expect some cosmetic marks or minor wear from chip deflection. However, the heavy steel construction ensures the clamping jaws will still hold the blade tightly and securely.

    Brand Information

    Iscar (headquartered in Israel) is widely considered the world leader in parting and grooving technology. They invented the original “Self-Grip” cut-off system that revolutionized modern lathe work. Their tool blocks are precision-machined from high-quality hardened steel, ensuring they won’t warp, crack, or strip threads under heavy clamping loads like cheaper imports often do.

    Specifications

    FeatureSpecification
    BrandIscar
    ModelSGTBN 16-5
    TypeParting / Grooving Blade Block
    Shank Size16mm x 16mm (5/8″ x 5/8″)
    Accepts Blade Height26mm (1.024″)
    Overall LengthApprox. 76mm (3.00″)
    IncludedBlock only (Blade not included)

    Keywords

    Iscar SGTBN 16-5, parting tool block, grooving blade holder, cut-off tool block, 16mm lathe tool, 5/8 parting block, 26mm blade holder, machinist tools, Iscar tooling.

  • Mitutoyo Quick Mini 700-117SU

    Mitutoyo Quick Mini 700-117SU

    Condition

    New Old Stock (NOS) / Open Box.

    This digital thickness gauge is a “New Old Stock” item. It is unused and presents in perfect, like-new condition with no signs of wear. Please Note: Although the unit is new, the packaging has been opened to install the battery for testing and storage purposes. It comes complete with its original Mitutoyo box, plastic sleeve, and documentation.

    Product Overview

    The Mitutoyo Quick Mini 700-117SU is a lightweight, palm-sized digital comparator designed for rapid thickness inspection. Unlike standard micrometers which require two hands to operate, the Quick Mini features a spring-loaded spindle that allows for “one-touch” measurement—simply press the plunger to lift the anvil, insert your part, and release to get an instant reading.

    Quick Mini 700 Fact Sheet

    This specific unit features a measuring range of 0–14.5mm (approx. 0–0.57″), making it perfect for checking sheet metal, paper, plastic film, wire insulation, and jewellery. It features a clear LCD display with Inch/Metric conversion and a Zero/ABS button, allowing you to set a zero point anywhere within the range for comparative “go/no-go” testing. Its compact size means it fits easily in a pocket or apron for quick quality checks on the shop floor.

    Brand Information

    Mitutoyo Corporation (est. 1934) is the global authority in precision metrology. The “Quick Mini” series (Series 700) is a staple in quality control departments worldwide, prized for combining the accuracy of a bench comparator with the portability of a pocket tool. Even small tools like this benefit from Mitutoyo’s hardened stainless steel spindles and rigorous quality control.

    Specifications

    FeatureSpecification
    Model700-117SU (Quick Mini)
    Range0 – 14.5mm (0 – 0.5″)
    Resolution0.01mm / 0.0005″
    Accuracy±0.02mm
    DisplayLCD (Inch/Metric Switchable)
    MechanismSpring-Loaded Spindle
    BatterySR44 (Installed)
    IncludedOriginal Box, Sleeve, Papers

    Keywords

    Mitutoyo, 700-117SU, Quick Mini, thickness gauge, pocket comparator, digital thickness gauge, paper gauge, wire gauge, 0-15mm gauge, Japanese metrology.

  • Noga Deburring Blades BS1010

    Noga Deburring Blades BS1010

    Product Overview

    The Noga BS1010 is the absolute industry standard for deburring. If you own a deburring tool, this is likely the blade you use 90% of the time.

    Known as the “S10” Blade, it is a general-purpose heavy-duty blade designed for the vast majority of workshop materials.

    • Versatility: Works perfectly on Steel, Aluminium, and Plastic.
    • Geometry: Features a 40° cutting angle which provides the best balance between edge life and cutting aggression.
    • Compatibility: Fits almost all standard deburring handles (Noga NG-1, SG-1, NB handle, and many generic holders like Shaviv or Vargus that accept 3.2mm swivel blades).
    • Material: Made from High-Speed Steel (HSS) with a hardness of 62-64 Rc.

    Condition

    New (10 Pack).

    This is a brand-new plastic pack containing 10 x Genuine Noga BS1010 Blades.

    • Note on Fakes: There are many cheap copies of this blade on the market that dull after one hole. These are genuine Noga blades, made in Israel, ensuring they hold their edge across hundreds of parts.

    Brand Information

    Noga Engineering (Israel) invented the modern swivel-blade deburring tool. Their “S-System” is the global standard, and despite many imitators, Noga blades remain the sharpest and longest-lasting options available for manual finishing.

    Specifications

    FeatureSpecification
    ModelBS1010 (S10)
    Blade TypeS-Blade (3.2mm Swivel)
    MaterialHSS (High Speed Steel)
    Angle40°
    Hardness62-64 Rc
    ApplicationSteel, Aluminium, Plastic
    DirectionRight Hand (Clockwise)
    Quantity10 Blades per pack

    Keywords

    Noga, BS1010, S10 blade, deburring blades, Noga blades, deburring tool refills, HSS deburring blade, machinist tools, finishing tools.

  • Mitutoyo Digital Dial Gauge 543-781

    Mitutoyo Digital Dial Gauge 543-781

    Condition

    Used (Good Working Condition / Multi-Quantity Listing).

    These digital indicators are in good used condition and are fully functional. Please Note: This listing is for one (1) indicator, chosen from a batch of similar units. While the specific serial number may vary from the photos, all units share the same condition: they show signs of normal workshop use, including light superficial marks on the body or crystal, but have been tested to be repeatable and accurate. The spindle movement is smooth, and the LCD segments are clear.

    Product Overview

    The Mitutoyo 543-781 (ID-S1012M) is a robust “Economy Series” Digimatic Indicator designed for simple, reliable measurement. It features a standard measuring range of 12.7mm with a resolution of 0.01mm.

    Unlike complex high-end models, the ID-S series focuses on ease of use with just two buttons: Origin (to set the absolute zero point) and Power/Zero (to zero the display at any position for incremental measurement). It utilises Mitutoyo’s proprietary ABSOLUTE electrostatic capacitance sensor, meaning the origin point is stored even when the power is turned off, you don’t have to re-set the zero every time you pick it up. It has an 8mm stem and a standard lug back for mounting.

    Brand Information

    Mitutoyo Corporation (est. 1934) is the global leader in precision metrology. The ID-S series was designed to be as tough as a mechanical dial gauge but with the error-free reading of a digital screen. They are the “daily driver” of the digital indicator world—simple, battery-efficient, and incredibly durable.+1

    Specifications

    FeatureSpecification
    Model543-781 (ID-S1012M)
    Range12.7mm
    Resolution0.01mm
    Accuracy±0.02mm
    BatterySR44
    TechnologyABSOLUTE Linear Encoder
    Stem Diameter8mm
    Back TypeLug Back
    IncludedIndicator Only (1 pc)

    Keywords

    Mitutoyo, 543-781, ID-S1012M, digital indicator, dial gauge, 12mm indicator, standard digital indicator, absolute indicator, workshop tools, machinist tools.

  • Peacock Dial Test Indicator PCN-1BZB

    Peacock Dial Test Indicator PCN-1BZB

    Condition

    Used (Working Condition / Cosmetic Wear).

    This dial test indicator is in used condition. As noted, it is cosmetically “rough,” showing signs of regular workshop service on the body and bezel. However, it has been tested and is functioning nicely. The movement is smooth, and the auto-reverse mechanism operates correctly. Please Note: This is sold as the Gauge Only (no box, stems, or accessories included).

    Product Overview

    The Peacock PCN-1BZB is a premium “Z-Series” One Revolution dial test indicator. Unlike standard PCN-1B models, this specialised “Z” version features a limited measuring range of 0.6mm to prevent reading errors.

    • Error-Free Reading: The pointer remains within a single revolution (or less), making it impossible to miscount multiple rotations—a common source of scrap in precision machining.
    • Clutchless (Auto-Reverse): It features Peacock’s signature “Clutchless” lever mechanism. You do not need to flip a switch to change direction; the pointer always rotates clockwise regardless of whether the stylus moves up or down.
    • High Sensitivity: The “Z” series utilises miniature jewelled bearings at the pivot point for exceptional sensitivity and durability.
    • Visual Zones: The dial face typically features a colour-coded (Yellow/Blue) background to clearly indicate the “usable” measuring range and the “dead zone”.

    Brand Information

    Peacock (Ozaki Mfg. Co., Ltd.) is one of Japan’s “Big Three” metrology manufacturers (alongside Mitutoyo and Teclock). They are particularly famous for their “Pic Test” lever indicators, which are often preferred by toolmakers for their smooth, low-friction movements and robust clutchless design.

    Specifications

    FeatureSpecification
    ModelPCN-1BZB (“Z” Series)
    TypeOne Revolution / Clutchless
    Graduation0.01mm
    Range0.6mm (Limited for error proofing)
    AccuracyWide Range: 5µm
    Measuring Force0.3N or less
    Bearing TypeJewelled
    IncludedIndicator Only

    Keywords

    Peacock, PCN-1BZB, Pic Test, Z series indicator, one revolution indicator, clutchless indicator, lever indicator, dial test indicator, Japanese tools, 0.01mm indicator.

Mavero Digital - Get a website