Small Flat Rate Satchel

Name: Makers Market
Price range: $$

Auspost Flat Rate

Kato MT3 SA412-III Quick Change Tapper

Product Overview

Hand-tapping threaded holes on the drill press is a workflow killer — you’re fighting perpendicularity every cycle, breaking taps on the entry, and producing inconsistent thread quality that sends jobs back to the bench for rework. A quality quick-change tapping head eliminates all of that: it drives the tap straight, reverses automatically on retract, and swaps collets in seconds so you can run an entire thread schedule without breaking your setup. The Kato SA412-III on a Morse Taper 3 shank is precisely that solution — a proven, reversing tapper that fits directly into a drill press or mill spindle and delivers repeatable, torque-controlled tapping from M3 through to M12. This unit presents in like-new condition with a full set of seven tension-compression collets included.

Automatic forward/reverse operation — the SA412-III uses a built-in clutch and reversing mechanism so the tap drives on the down-stroke and backs out cleanly on retract without repositioning the spindle direction. This is what prevents tap breakage and crossed threads at scale.
Tension-compression float — the collet chuck has axial float built in, meaning the tapper accommodates minor lead-screw mismatch between the machine feed and the tap pitch. Critical when running on a drill press that doesn’t have a synchronised feed.
MT3 shank with tang — the Morse Taper 3 shank seats directly into a standard drill press or Bridgeport-style mill quill. The tang positively locks the tapper against rotational slip under load, no drawbar required. MT3 is the most common spindle taper in Australian jobbing shops for this size class.
Quick-change collet system — collets swap without tools via a push-and-twist action, so moving from M5 to M8 takes under ten seconds. Seven collets are included covering M3 through M12, which accounts for the majority of general engineering thread schedules.
Ideal for — production tapping on a drill press or knee mill, batch threading in fabrication and fitter/turner work, toolroom use where consistent tap alignment is non-negotiable, and home shop operators stepping up from hand-tapping to machine tapping.

Condition

Used (Like New / minimal use, full mechanical function)

The tapper body and shank show no meaningful signs of shop wear — the knurled collar, body finish, and MT3 taper surfaces are clean and unmarked, consistent with a tool that has seen very light use or bench storage rather than heavy production. The collets are in matching condition with no visible wear to the driving flats or collet bores. The reversing mechanism engages and releases cleanly with the tactile positive action characteristic of a properly functioning Kato unit. The “MT3-SA412” and “KATO TAPPER” markings on the body are sharp and fully legible. One collet (M12) shows a lighter, slightly different surface finish compared to the others — likely a replacement or from a different production batch — but this has no bearing on function. As with any used tapping head, it is recommended to confirm clutch slip torque behaviour on a scrap piece before committing to a critical job, and to verify each collet seats and releases cleanly in the chuck body prior to use.

Included:

1 x Kato SA412-III Quick Change Tapper — MT3 shank
1 x M3 tension-compression collet
1 x M4 tension-compression collet
1 x M5 tension-compression collet
1 x M6 tension-compression collet
1 x M8 tension-compression collet
1 x M10 tension-compression collet
1 x M12 tension-compression collet

Not included: Original storage case or box, instruction sheet. No drawbar is required for MT3 taper use.

Brand Information

Kato is a Japanese manufacturer with a long-standing reputation in the machine tapping attachment market, producing tapping heads used in toolrooms and production shops across Japan, Australia, and export markets worldwide. Kato tappers sit in the same recognised tier as Tapmatic and Procunier — purpose-built, mechanically robust tapping heads known for consistent clutch action and long service life when properly maintained. Japanese manufacture is a reliable indicator of close tolerances in the collet interface and taper geometry, and the SA412 series has been a shop-floor staple in this size class for decades.

Specifications

Feature	Specification
Brand	Kato
Model	SA412-III (Quick Change Tapper)
Type	Reversing tension-compression tapping head
Shank / Mount	Morse Taper 3 (MT3) with tang
Tapping Capacity (Metric)	M3 – M12
Collet System	Quick-change tension-compression collets (push-and-twist)
Included Collets	M3, M4, M5, M6, M8, M10, M12 (7 collets)
Operation	Automatic forward / reverse via built-in clutch and reversing mechanism
Axial Float	Yes — tension-compression float to compensate feed/pitch mismatch
Compatible Machines	Drill press, knee mill, machining centre with MT3 spindle
Country of Origin	Japan
Condition	Used (Like New) — minimal use, full mechanical function
Included Items	Tapper body + 7 x collets (M3–M12)
Not Included	Storage case, instruction sheet

Keywords

Kato SA412 tapping head, Kato quick change tapper, MT3 tapping head, reversing tapper MT3, tension compression tapping attachment, quick change tapper M3 M12, machine tapping head drill press, tapping head mill spindle, Kato tapper Australia, tapping head collet set, production tapper toolroom, Morse taper 3 tapping head

Kabuto MT3 Live Center Interchangeable Tip

Condition: New – unused, but stored outside of its box for some time. Shows minor signs of age from storage, though all machined surfaces remain perfect. The replaceable tip is still factory-sealed in its bag. Supplied with the original eject tool.

Product Overview

This Kabuto MT3 live center is a precision-engineered tool designed for turning applications on lathes. With a Morse Taper 3 (MT3) shank and an interchangeable tip system, it allows operators to swap tips for specific turning requirements while maintaining high concentricity and rigidity.

The sealed spare tip and included eject tool make this a flexible, workshop-ready solution for machinists who demand accuracy, durability, and versatility in their turning setups. Kabuto tooling is respected for its precision and robust construction, ensuring long service life and repeatable accuracy.

Features & Specifications

Specification	Detail
Brand / Model	Kabuto MT3 Live Center
Taper Shank	Morse Taper 3 (MT3)
Tip System	Interchangeable, precision-ground
Included Accessories	Sealed replaceable tip, eject tool
Applications	General lathe turning, precision support of rotating workpieces
Condition Notes	New, unused; minor storage marks; machined surfaces flawless; tip still sealed

Keywords

Kabuto live center, MT3 live center, interchangeable tip live center, Morse Taper 3 lathe center, precision turning tool, machinist tooling.

Mitutoyo Digital Gauge 543-400B

Product Overview

The 543-400B is Mitutoyo’s workhorse digital dial indicator: 12.7 mm range, 0.01 mm resolution, delivered in a compact, shop-proven body that’s earned its place on toolroom benches across the globe. This unit presents in good used condition with verified function.

ABSOLUTE Encoder Technology — no re-zeroing after power loss. Unlike conventional incremental encoders that forget their position the moment the display sleeps, the ABSOLUTE capacitive encoder retains origin data indefinitely. On a busy shop floor where the indicator gets knocked, pocketed, or powered down between setups, this is a genuine time-saver and error-eliminator.
0.01 mm Resolution over a 12.7 mm Range — readable at a glance under fluorescent shop lighting. The large LCD delivers a clear numeric readout without the parallax error inherent in analogue needle indicators, making it reliable for checking four-jaw chuck setups, lathe tailstock alignment, and press-fit interference verification where you need a definitive number, not an estimated needle position.
8 mm Stem (Shank) Diameter — fits the overwhelming majority of indicator holders, magnetic bases, and tooling arms. The standardised 8 mm stem means the 543-400B drops straight into most Noga, Kanetop, and generic dial indicator holders without needing adaptors — critical when you’re mid-setup and adaptor hunting is not on the agenda.
mm / inch Switchable via MODE button — one tool for both drawing standards. Particularly useful in Australian job shops working across metric-native and legacy imperial drawings, or when verifying against imported tooling with inch callouts.
Ideal for: tramming mill heads and vices square, four-jaw chuck centring, lathe spindle and tailstock runout checks, surface grinder table flatness traverses, press and assembly datum verification, and CMM probe qualification checks.

Condition

Used (Good Condition / Verified Functional)

The display is clean and fully legible with no dead segments or flickering observed. The measuring spindle travels smoothly through its full 12.7 mm range without stiction or binding, and returns consistently under spring pressure — the key functional test for any plunger-type indicator. The stem and contact point show the expected patina of shop use: minor surface marks consistent with indicator holder clamping are present on the 8 mm shank, and there is light general wear to the body finish, but no dents, cracks, or damage to the front bezel or display face. The contact point tip shows wear consistent with normal use and may benefit from replacement before critical measurement work — Mitutoyo replacement contact points (flat, ball, and carbide options) are inexpensive and widely stocked. As with any used precision instrument, verification against a known standard — a gauge block stack or calibrated ring gauge — is recommended before placing the unit into a production environment. For toolroom setup, runout checking, and general comparative measurement, the gauge performs as expected.

Included:

1 x Mitutoyo Digital Dial Indicator 543-400B (12.7 mm range / 0.01 mm resolution, mm/inch)

Not included: Original carry case, calibration certificate, spare battery, indicator holder or magnetic base. A standard SR44 / 357 silver oxide cell is required if the battery is depleted.

Brand Information

Mitutoyo Corporation, founded in Japan in 1934, is the benchmark name in precision metrology — the brand that toolmakers, quality engineers, and NATA-accredited laboratories reach for when accuracy is non-negotiable. Manufactured in Japan to exacting tolerances, Mitutoyo instruments sit at the top tier of the global metrology market alongside Mahr, Tesa, and Starrett, and consistently outperform generic OEM alternatives in long-term repeatability and build quality. In Australian trade and toolroom environments, Mitutoyo is the de facto standard — a used Mitutoyo instrument in good working order retains genuine shop-floor credibility that no-name equivalents simply cannot match.

Specifications

Feature	Specification
Brand	Mitutoyo
Model	543-400B
Series	543 — ABSOLUTE Digimatic Indicator (ID-C)
Type	Digital Plunger-Type Dial Indicator
Measuring Range	12.7 mm (0.5 inch)
Resolution	0.01 mm / 0.0005 inch
Accuracy	±0.02 mm (per Mitutoyo specification for 543-400B)
Repeatability	0.01 mm
Display	LCD with mm / inch switchable readout
Origin System	ABSOLUTE capacitive encoder — retains zero after power-down
Stem (Shank) Diameter	8 mm
Contact Point Thread	M2.5 x 0.45 (standard Mitutoyo thread)
Battery	SR44 / 357 silver oxide cell x 1
Data Output	Mitutoyo Digimatic SPC output port (DATA button present)
Construction	ABS resin body, hardened steel spindle and stem
Country of Origin	Japan
Condition	Used — Good Condition / Verified Functional
Included	Indicator only (543-400B)
Not Included	Case, calibration certificate, magnetic base, spare battery

Keywords

Mitutoyo 543-400B, Mitutoyo digital dial indicator, Mitutoyo ABSOLUTE indicator, digital dial gauge 12.7mm, Digimatic indicator Australia, dial gauge SPC output, toolroom indicator 0.01mm, plunger dial indicator 8mm stem, runout gauge machinist, dial indicator CNC setup, precision measuring tools Australia, digital bore gauge indicator

Peacock Automotive Dial Gauge Set BK-10

Checking bore wear, measuring crankshaft journal runout, or verifying cylinder taper demands a bore gauge that can reach deep, transfer a reliable reading, and hold its zero under shop-floor conditions — a standard dial indicator on a surface stand simply won’t cut it. The Peacock BK-10 Automotive Dial Gauge Set is purpose-built for exactly this kind of inside-diameter inspection work: the telescoping extension rods let you reach into bores that would defeat a short-stem setup, while the dial indicator transfers the measurement cleanly to a face you can actually read. This is a used set in good mechanical condition, complete with its original metal case, Japanese instruction sheet, and full extension rod complement — everything you need to get straight to work.

Dial indicator with clear graduated face — The included dial indicator reads to fine graduation increments, giving you the resolution needed to detect cylinder taper, out-of-round, and journal wear that falls well inside condemnable limits. A coarse indicator here costs you the diagnostic call.
Modular extension rod system — Multiple interchangeable extension rods allow the gauge head to be positioned at varying depths inside a bore. This matters when you’re measuring at the top, middle, and bottom of a cylinder to map taper and barrel wear across the full stroke length.
Knurled centralising body — The knurled grip on the gauge body aids controlled insertion and rotation inside the bore, keeping the measuring contact on the correct axis and reducing the risk of a tilted reading that skews your result.
Compact metal carry case with fitted interior — All components nest in a purpose-made tin case with a formed lining. For a tool that relies on delicate contact points and a calibrated indicator spring, a fitted case is not a luxury — it’s what keeps the set accurate between uses.
Ideal for — Automotive engine reconditioning (cylinder bore measurement, crankshaft journal runout), small engine and motorcycle engine inspection, lathe bore checking, toolroom incoming inspection of bored components, and four-jaw chuck bore verification.

Condition

Used (Good Condition / Pre-owned, mechanically sound)

The dial indicator face is clean and legible, with no cracked crystal and no fogging to the dial markings — you can read it clearly under normal workshop lighting. The indicator needle responds freely and returns to zero consistently when the spindle is released, indicating the internal spring and rack mechanism are in serviceable order. The extension rods show the expected light handling marks and minor surface patina consistent with previous use, but the contact surfaces are free of the kind of damage — deep gouging, burred threads, or bent stems — that would compromise a square, repeatable setup. The metal carry case shows external wear and age consistent with a tool that has been used and stored on a working bench rather than kept in a cabinet; the internal lining remains intact and continues to protect the components. The original Japanese instruction sheet is present and readable. As with any used bore gauge set, we recommend zeroing the indicator against a calibrated setting ring or a known-good master bore of the correct diameter before committing measurements to a job — this is standard practice regardless of the tool’s age and confirms the unit is reading true before you start condemning or passing components.

Included:

1 x Peacock BK-10 Automotive Dial Gauge Set (dial indicator, centralising gauge body, full extension rod set)
1 x Original metal carry case with fitted interior lining
1 x Original Japanese instruction/specification sheet

Not included: Setting ring / master ring gauge (required for zeroing — not supplied), no additional replacement contact points beyond those present in the set.

Brand Information

Peacock is a trade name of Ozaki Mfg. Co., Ltd., a Japanese precision instrument manufacturer with a long-standing reputation in the metrology and automotive measurement sector. Made in Japan, Peacock instruments sit in the same recognised tier as RSK and Teclock — competent, shop-floor-reliable Japanese tooling that is taken seriously by professional engine reconditioners, toolmakers, and fitters across the Asia-Pacific region. While Peacock does not carry the same global profile as Mitutoyo or Mahr, their bore gauge and dial indicator sets are well regarded for consistent mechanical quality and durability under regular workshop use.

Specifications

Feature	Specification
Brand	Peacock (Ozaki Mfg. Co., Ltd.)
Model	BK-10 Automotive Dial Gauge Set
Type	Telescoping bore / cylinder dial gauge set
Indicator Type	Dial indicator (analogue, plunger type)
Graduation / Resolution	Refer to indicator face markings (verify against instrument prior to use)
Extension Rod System	Multiple interchangeable rods included — modular depth reach
Body / Construction	Steel rods and gauge body; knurled grip section; steel dial indicator
Country of Origin	Japan
Condition	Used — Good Condition
Included Items	Dial indicator, gauge body, extension rods, original metal carry case, instruction sheet
Not Included	Setting ring / master ring gauge

Keywords

Peacock BK-10, Peacock dial gauge set, Peacock bore gauge, automotive dial gauge set, cylinder bore gauge Japan, telescoping bore gauge set, dial indicator bore gauge, engine recondition measuring tool, bore gauge toolroom, Japanese precision measuring tool, bore gauge machinist, cylinder taper measurement gauge

J.A.M Precision Grinding & Machinist Vise 70x80mm DM80-2

Product Overview

A proper precision vice is the difference between chasing your setup all day and hitting first-part tolerance out of the gate. The J.A.M. DN80-2 is a Japanese-made precision stainless vice built for the serious end of the toolroom — NC/MC work, precision grinding, tapping, and fine-finish cutting. Jaw faces are ground square to reference, and the body is made from stainless steel rather than the usual tool-steel casting, which means it shrugs off coolant, cutting oil, and humid workshop conditions without the rust bloom that eventually ruins every carbon-steel vice. The horizontal V-groove in the moving jaw extends the tool’s usefulness dramatically — round stock can be clamped on-axis without hunting for matched V-blocks.

Stainless steel construction — corrosion-resistant body for long service life in wet machining environments, flood-coolant setups, and humid storage.
80mm jaw opening × 70mm jaw width × 30mm jaw height — compact enough for toolroom mill tables, surface grinder chucks, and drill presses, with plenty of clamp depth for precision parts.x
Horizontal V-groove in the moving jaw for secure on-axis grip of shafts, pins, dowels, and bushings without slipping.
Ground jaw faces, base, and reference sides — use the vice itself as a setup reference; clamp it to an angle plate, lay it on its side, or mount it on a magnetic chuck with confidence.
Ideal for NC/MC fixture work, surface grinding small components, precision drilling and tapping, second-ops on turned parts, and die-shop tool-and-die fixturing.

Condition

Used (Great Condition).

Honest rundown: this DN80-1 has seen shop use but has been properly looked after. The ground jaw faces are clean with no dings, burrs, or peened edges that would compromise parallelism under clamp force. The V-groove in the moving jaw is crisp and unmarked. The handle mechanism and leadscrew operate smoothly through full travel with no notchy spots or excess backlash. Being stainless, there’s no rust or corrosion to contend with — one of the big advantages of this grade of vice over carbon-steel equivalents. Expect some minor cosmetic marks on the non-critical surfaces consistent with toolroom use; the precision surfaces (jaw faces, base, reference sides) are in excellent order. A wipe of light machine oil on the screw and it’s ready to work.

Included:

1 x J.A.M. DN80-2 Precision Stainless Vice (80mm opening × 70mm jaw width × 30mm jaw height)

Brand Information

J.A.M. — Japan Automatic Machine Co., Ltd. — is a respected Japanese precision tooling manufacturer whose precision vice range has a strong reputation in the mould and die industry. The company partners with Japanese material manufacturers to develop high-quality stainless steels and matched heat-treatment processes, delivering vices with genuine corrosion and wear resistance rather than the marketing claims you’ll see on lower-tier imports. A J.A.M. vice sits comfortably alongside Kurt and other premium toolroom vice makers, with the added benefit of true stainless construction in the DN-series.

Specifications

Feature	Specification
Brand	J.A.M. (Japan Automatic Machine Co., Ltd.)
Model	DN80-2
Type	Precision Stainless Vice — Handle Detachment type
Material	Stainless steel
Jaw Opening	80 mm
Jaw Width	70 mm
Jaw Height	30 mm
Moving Jaw Feature	Horizontal V-groove (for round stock)
Jaw Faces	Ground
Base / Sides	Ground reference surfaces
Applications	NC/MC fixture work, precision grinding, cutting, tapping
Country of Origin	Japan
Condition	Used — Great Condition
Included	Vice only

Keywords

J.A.M. DN80-2, J.A.M. precision vice, Japanese stainless vice, precision stainless vice, grinding vice, machinist vice, 80mm precision vice, toolroom vice, V-groove vice, Japan Automatic Machine vice, NC fixture vice, stainless steel vice

Mitutoyo 150mm Offset Jaw Calipers 573-101-10

Product Overview

Standard calipers are practically useless when you need to measure the distance between features on two different elevations. Enter the Mitutoyo 573-101-10 Digimatic Offset Caliper, a highly specialised metrology tool designed specifically to measure stepped workpieces and multi-level turned parts with zero guesswork.

Adjustable Offset Jaw: The standout feature of this tool is its adjustable main beam jaw. It can slide vertically to compensate for height differences on your workpiece. This allows you to accurately measure center-to-center distances, stepped profiles, and hard-to-reach features where standard fixed-jaw calipers simply cannot align squarely.
Absolute Encoder Technology: Powered by Mitutoyo’s legendary ABSOLUTE (ABS) linear scale. Once you set the origin point, the caliper remembers its exact position even after being powered off. Turn it on and measure immediately without needing to re-zero, eliminating over-speed errors entirely.
150mm Capacity: Covers a highly versatile 0mm to 150mm (approx. 6″) measuring range, making it a critical inspection tool for complex aerospace, automotive, and job-shop components.
Premium Construction: Crafted from hardened Japanese stainless steel, the beam and jaws are incredibly rigid and wear-resistant, ensuring the tool maintains its strict 0.01mm resolution accuracy for a lifetime of shop use.

Condition

Brand New (Factory Sealed).

These specialty digital calipers are in brand-new, completely unused condition. They remain securely sealed in their original Mitutoyo factory packaging, guaranteeing you are the first machinist to lay hands on them.

Included: Comes complete with the original plastic storage case, factory inspection certificates, battery, and all original documentation.

Brand Information

Mitutoyo Corporation (Japan) is the undisputed global benchmark for dimensional metrology. Their specialty Digimatic calipers are renowned for solving complex inspection problems on the shop floor, maintaining laboratory-grade accuracy and smooth operation even in harsh machining environments.

Specifications

Feature	Specification
Brand	Mitutoyo (Japan)
Model	573-101-10
Type	Digimatic Offset Jaw Caliper
Measuring Range	0mm – 150mm
Resolution	0.01mm
Special Feature	Sliding / Adjustable Main Jaw
Technology	Absolute Linear Encoder (ABS)
Condition	Brand New / Factory Sealed

Keywords

Mitutoyo 573-101-10, Mitutoyo offset caliper, offset jaw caliper, stepped caliper, specialty digital caliper, 150mm offset caliper, Mitutoyo Digimatic, machinist measuring tools, Japanese

JAM 55x45mm Grinding Vice

Product Overview

Setting up small workpieces on a surface grinder is where jobs get won or lost — a vice that isn’t flat, square, and repeatable will ruin a grind before the wheel even touches the part. When you need a compact, low-profile grinding vice that holds a workpiece dead parallel to the table and doesn’t creep under wheel load, a dedicated precision grinding vice is the only answer. A standard milling vice is too tall, too heavy, and not ground to the tolerances the job demands. This JAM* (attributed) 55 x 45 mm Japanese grinding vice delivers a precision-ground jaw face, a horizontal V-groove in the moving jaw for round stock, and a compact footprint that keeps your Z-axis clearance where you need it — measured here at 54.66 mm jaw opening on a Mitutoyo digital calliper.

Precision-ground jaw and base surfaces — The working faces and base are surface-ground, giving you a reliable flat reference that sits true on the magnetic chuck. Any deviation here telegraphs directly into your workpiece, so ground surfaces are the starting point, not a bonus.
Horizontal V-groove in the moving jaw — Allows round bar and cylindrical stock to be held on-centre without additional vee-blocks. Saves setup time and removes the slip risk you get when clamping round material between flat jaws.
Compact 55 mm max opening, 45 mm jaw width — Sized for small-to-medium surface grinding work. The narrow footprint keeps the vice within the capacity of most 6 x 12 inch and 6 x 18 inch surface grinder tables without consuming the full table length.
Included clamping bolts and steel block — The vice comes with socket-head bolts that thread into either side of the fixed jaw (used for clamping stops or parallels), and one block of unidentified steel of unknown purpose — included as-found, potentially a precision parallel or stop block.
Ideal for — Surface grinding small prismatic and round parts, tool and cutter grinding setups, finish-grinding shims and gauge blocks to thickness, and bench use as a precision holding fixture for filing and scraping.

Condition

Used (Good Condition / Surface Patina, Precision Surfaces Intact)

The vice is in good used condition. The precision-ground jaw faces, base, and sliding surfaces are intact and functional — no visible nicks, gouges, or raised burrs that would compromise accuracy or flatness. The moving jaw slides smoothly without detectable slop or binding. As is typical with Japanese toolroom equipment of this age, the external non-working surfaces carry a light patina — the honest mark of a tool that has seen shop use — but this patina is cosmetic only and does not extend to the ground reference surfaces. The clamping mechanism operates correctly and the jaws close square. The purpose of the included steel block is unknown; inspect it before use and verify it against a known reference if you intend to use it as a precision stop or parallel. As standard practice for any used grinding vice, it is recommended to sweep the base with a dial indicator on your magnetic chuck before committing it to precision work, confirming it sits flat and square to your table.

Included:

1 x JAM (attributed) Precision Grinding Vice — 55 mm max opening, 45 mm jaw width
Clamping bolts (thread into either side of fixed jaw)
1 x steel block of unknown origin/purpose

Not included: Original case or box, documentation, additional parallels or vee-blocks.

Brand Information

This vice is attributed to JAM, a Japanese tooling manufacturer, though the seller notes the brand identification is unconfirmed, possibly ETO which is also Japanese. Japanese-made precision grinding vices consistently occupy the upper tier of the market alongside names such as Vertex and Chick, with manufacturing tolerances and surface-finish standards that reflect Japan’s well-established culture of precision machine tool production. Japanese toolroom equipment of this type is widely regarded by Australian machinists and toolmakers as a reliable, long-service investment, typically holding its working accuracy well into its service life when properly maintained.

*Brand is told to be JAM but possibly ETO or another Japanese brand.

Specifications

Feature	Specification
Brand	JAM (attributed — unconfirmed by seller)
Type	Precision Grinding Vice
Maximum Jaw Opening	55 mm (measured 54.66 mm via Mitutoyo digital calliper)
Jaw Width	45 mm
Moving Jaw Feature	Horizontal V-groove for round stock
Base / Jaw Surfaces	Precision ground
Construction / Material	Hardened steel (typical for class)
Clamping	Socket-head bolts threading into fixed jaw sides
Country of Origin	Japan
Condition	Used — Good Condition / Surface patina, precision surfaces intact
Included Items	Vice, clamping bolts, 1 x steel block (purpose unknown)
Not Included	Case, documentation, additional parallels or accessories

Keywords

JAM grinding vice, Japanese precision grinding vice, surface grinder vice 55mm, precision grinding vice Australia, small grinding vice toolroom, surface grinding workholding, grinding vice V-groove, used grinding vice, machinist vice surface grinder, toolmaker grinding vice, precision vice CNC setup, grinding vice magnetic chuck

JAM 120x90mm Grinding Vice DS120

Product Overview

When you’re setting up a workpiece on the surface grinder and you need it held dead square with zero rock, a worn or undersized vice becomes the weak link in your whole setup — and the grind shows it. The JAM DS120 Precision Grinding Vice is built specifically to solve that problem: ground on all reference surfaces to tight tolerances, it gives you a reliable, repeatable clamping platform whether you’re finishing a gauge block holder, grinding a punch or die, or holding a milled component for a final skim pass. This is a used Japanese-made precision grinding vice with honest surface patina but fully functional ground faces and clamping mechanism.

120 mm jaw opening capacity, 90 mm jaw width — the DS120 designation reflects the 120 mm body length; at 120 mm wide, this vice spans enough of a magnetic chuck to sit stable without rocking, which matters when you’re taking light finishing passes and can’t afford any movement mid-grind.
Ground reference surfaces on all critical faces — the base, jaw faces, and sides are precision ground, meaning you can stand this vice on its side to grind compound angles and trust the reference surface rather than having to indicate it in from scratch every time.
Japanese manufacture (JAM / J.A.M.) — JAM tooling is built to toolroom-grade standards; the construction quality and surface finish on a unit like this sits well above generic import grinding vices and is comparable to other respected Japanese precision vice makers.
Compact, low-profile body — keeping the workpiece close to the chuck surface reduces the leverage a cutting force has on the setup, which directly improves grind quality and reduces chatter risk on lighter surface grinders.
Ideal for: surface grinder workholding, tool and cutter grinding setups, EDM electrode holding, optical profile grinding, and any bench situation where you need a precision ground clamping reference.

JAM 125x90mm Grinding Vice DS120 Dimensions

Condition

Used (Good Condition / Surface Patina, Mechanically Sound)

The ground jaw faces, base, and side reference surfaces are intact and free from the kinds of dings or gouges that would compromise squareness or flatness — the surfaces that actually do the work are in good shape. The vice shows what you’d expect from a quality tool that has lived in a real shop: general surface patina and oxidisation discolouration across the body and non-critical faces, consistent with a well-used but properly stored grinding vice. The screw mechanism operates smoothly with no detectable slop or binding, and the moving jaw tracks cleanly without side-play that would affect clamping accuracy. The patina is cosmetic; it does not affect the ground reference surfaces or the clamping function. That said, as with any used precision vice, we’d recommend checking the base flatness against your surface plate and confirming jaw squareness with a test indicator and ground parallel before relying on it for close-tolerance work — standard practice for any second-hand precision workholding.

Included:

1 x JAM DS120 Precision Grinding Vice — 120 mm capacity, 90 mm jaw width

Not included: No case, no spanner/wrench, no parallels, no documentation. Buyer to supply their own operating hardware.

Brand Information

JAM (J.A.M. Co., Ltd.) is a Japanese manufacturer of precision machine tool accessories, including grinding vices, angle plates, and workholding equipment, produced to the exacting tolerances the Japanese toolroom industry is known for. Their precision vices sit in the same market tier as RSK and Vertex Japan — serious production and toolroom equipment rather than hobby-grade import workholding. Japanese manufacture is a meaningful specification here: the grinding, scraping, and quality control standards applied to JAM products reflect a manufacturing culture where toolroom-grade accuracy is the baseline expectation, not a premium add-on.

Specifications

Feature	Specification
Brand	JAM / J.A.M. Co., Ltd.
Model	DS120
Type	Precision Grinding Vice
Jaw Width	90 mm
Maximum Jaw Opening (Capacity)	125 mm
Body Length	120 mm (nominal — per DS120 designation)
Measured Width (as listed)	90 mm (verified by Mitutoyo digital calliper — see image)
Reference Surfaces	Precision ground base, jaw faces, and body sides
Material / Construction	Hardened steel, ground finish
Country of Origin	Japan
Condition	Used — Good Condition; surface patina present, ground faces and mechanism sound
Included Items	Vice only
Not Included	Case, operating spanner, parallels, documentation

Note: Specifications cross-referenced against the JAM official product page for the DS120 series (jam-net.co.jp). Jaw width measurement of 124.25 mm confirmed via Mitutoyo digital calliper as shown in product photography. Minor variance from nominal 120 mm is within expected measurement context (outside body measurement vs. jaw face dimension). Buyers requiring exact tolerances should verify against their own reference standards on receipt.

Keywords

JAM DS120, JAM precision grinding vice, J.A.M. grinding vice, DS120 120mm grinding vice, precision grinding vice Australia, surface grinder vice workholding, toolroom grinding vice, Japanese precision vice, surface grinder workholding, precision machine vice used, grinding vice EDM workholding

BIG Daishowa 3D Master 3DM-10A

Product Overview

Finding edges, locating hole centres, and setting tool Z-heights on a CNC or manual mill is the kind of task where a 3D probe saves genuine time and eliminates the guesswork of wigglers and paper-feel methods. The BIG Daishowa 3D Master 3DM-10A is Japan’s answer to probing done right: a single mechanical 3-axis touch sensor that reads X, Y, and Z deflection on a large, easy-to-read dial gauge — unlike wiggler-style edge finders that only work on one axis, or electronic probes that tie you to a specific machine’s probing system. Chuck it in a 10mm collet, wind down, and you’ve got sub-hundredth repeatability in all three directions on any machine that’ll hold the shank. Ideal for tool setters, jobbing shops, mould makers, and anyone who values accurate probing without the cost of a Renishaw installation.

True 3-axis mechanical probe — reads X, Y, and Z deflection on a single large analogue dial, no electronic interface required.
0.01mm graduation with repeatability typically under 0.01mm — genuine production-grade accuracy for edge finding and centering.
Works on any material including non-conductive workpieces (resin, ceramic, coated parts) — no need for electrical conductivity like entry-level electronic edge finders require.
±4mm XY stroke and 4mm Z stroke — generous over-travel protects the probe from light crashes and lets you ride into position confidently.
10mm straight shank fits directly into any 10mm collet chuck (ER, TG, straight collet), or a 10mm milling holder.
Compact body design avoids interference with workpiece geometry in tight setups.
Ideal for CNC and manual mill setup, mould and die work, edge finding on non-conductive materials, hole and boss centre-finding, Z-height setting, and tool-setter duty.

Condition

Used (Like New Gauge / Cosmetic Gouge on Body — Pictured).

Full transparency on this one, as the damage is visible in the listing photos:

The good news: the 3D Master itself presents as virtually new — the stylus is straight, the dial gauge face is clear and unmarked, and the probe operates cleanly in all three axes with expected smooth motion and accurate return-to-zero. Testing confirms the gauge is working correctly and reading accurately; consistent with the tool having seen relatively little actual use.

The honest disclosure: there is a visible gouge on the body housing, caused by a previous operator crashing the tool into a workpiece (pictured in the listing). The damage is cosmetic — it’s on the outer body and does not affect the probe mechanism, the stylus, or the reading accuracy. Any experienced toolroom operator will recognise this as the “it happened once, to everyone” kind of battle scar that comes with probe ownership. Nothing to compromise the tool’s function; just something to be aware of before purchase. The fact you can pick up a genuine 3DM-10A at used-tool money rather than full retail is the practical upside here.

The original box shows its age — dusty and grubby from storage — but the tool inside is what matters.

Included:

1 x BIG Daishowa 3D Master 3DM-10A (10mm shank)
Original ball-end stylus
Original storage box (dusty, used condition)

Brand Information

BIG Daishowa (also sold as BIG KAISER in Europe/US) is one of the most respected names in precision tool-holding and machine setup instruments globally. Founded in Osaka, the company has become the de-facto standard for high-end tool holders, collet chucks, and setup tools in premium CNC shops worldwide. Their 3D Master is widely considered the benchmark mechanical 3-axis probe — copied by many, matched by few. Buying a genuine BIG Daishowa probe means you’re getting the real stylus geometry, bearing quality, and repeatability that the brand’s reputation is built on.

Specifications

Feature	Specification
Brand	BIG Daishowa (BIG KAISER)
Model	3D Master 3DM-10A
Type	Mechanical 3-Axis Touch Probe & Edge Finder
Shank	10 mm straight
Measurement Axes	X, Y, Z (single tool, single dial gauge)
Graduation	0.01 mm
Repeatability	< 0.01 mm
XY Stroke	±4 mm
Z Stroke	4 mm
Compatible Materials	All materials including non-conductive (resin, ceramic, coated)
Country of Origin	Japan
Condition	Used — Gauge Like New, Cosmetic Body Gouge (Pictured)
Included	Probe, ball stylus, original box

Keywords

BIG Daishowa 3D Master, 3DM-10A, 3D Master probe, BIG Kaiser 3D Master, mechanical touch probe, 3 axis edge finder, CNC edge finder, mill edge finder, XYZ probe, 10mm shank probe, Japanese touch probe, BIG Daishowa probe, 3D edge finder

J.A.M Precision Grinding & Machinist Vise 80x70mm

Product Overview

A proper precision vice is the difference between chasing your setup all day and hitting first-part tolerance out of the gate. The J.A.M. DN80-1 is a Japanese-made precision stainless vice built for the serious end of the toolroom — NC/MC work, precision grinding, tapping, and fine-finish cutting. Jaw faces are ground square to reference, and the body is made from stainless steel rather than the usual tool-steel casting, which means it shrugs off coolant, cutting oil, and humid workshop conditions without the rust bloom that eventually ruins every carbon-steel vice. The horizontal V-groove in the moving jaw extends the tool’s usefulness dramatically — round stock can be clamped on-axis without hunting for matched V-blocks.

Stainless steel construction — corrosion-resistant body for long service life in wet machining environments, flood-coolant setups, and humid storage.
80mm jaw opening × 70mm jaw width × 30mm jaw height — compact enough for toolroom mill tables, surface grinder chucks, and drill presses, with plenty of clamp depth for precision parts.
Handle-fixation clamping mechanism — tighten the workpiece, lock the handle, and the vice holds without creep under cutting load.
Horizontal V-groove in the moving jaw for secure on-axis grip of shafts, pins, dowels, and bushings without slipping.
Ground jaw faces, base, and reference sides — use the vice itself as a setup reference; clamp it to an angle plate, lay it on its side, or mount it on a magnetic chuck with confidence.
Ideal for NC/MC fixture work, surface grinding small components, precision drilling and tapping, second-ops on turned parts, and die-shop tool-and-die fixturing.

Condition

Used (Great Condition).

Included:

1 x J.A.M. DN80-1 Precision Stainless Vice (80mm opening × 70mm jaw width × 30mm jaw height)

Brand Information

Specifications

Feature	Specification
Brand	J.A.M. (Japan Automatic Machine Co., Ltd.)
Model	DN80-1
Type	Precision Stainless Vice — Handle Fixation Type
Material	Stainless steel
Jaw Opening	80 mm
Jaw Width	70 mm
Jaw Height	30 mm
Moving Jaw Feature	Horizontal V-groove (for round stock)
Jaw Faces	Ground
Base / Sides	Ground reference surfaces
Applications	NC/MC fixture work, precision grinding, cutting, tapping
Country of Origin	Japan
Condition	Used — Great Condition
Included	Vice only

Keywords

J.A.M. DN80-1, J.A.M. precision vice, Japanese stainless vice, precision stainless vice, grinding vice, machinist vice, 80mm precision vice, toolroom vice, V-groove vice, Japan Automatic Machine vice, NC fixture vice, stainless steel vice

KKS Boring Tool ABH-26 C32

Product Overview

Holding bore tolerances of a couple of hundredths on a VMC or manual mill is the kind of job where a boring head earns its spot in the toolbox. Once you’ve set a bore with a drill and need to bring it to a precise size — whether you’re fitting a bearing race, finishing a reamer lead-in, or hitting an H7 tolerance — a quality Japanese fine boring head is the tool for the job. The KKS ABH-23 is the industry reference in Japan for compact, precision fine-boring work, with hardened and ground micro-adjust screws that let you dial in the cut to the hundredth without guesswork or crashed parts. New.

KKS ABH-23 fine boring head — Japanese-made, known for precise, repeatable diameter adjustment and long service life under shop use. 32mm parallel shank, 23mm body.
Direct-reading 0.05mm graduation with vernier interpolation down to 0.01mm — the standard format for KKS’s small-to-mid ABH sizes.
Ground micro-adjust screw (not cast) — gives consistent adjustment feel across the full diameter range, and remains accurate after years of use.
Accepts standard KKS ABH-system boring bars and tool bits — including 60° square-bit (A-type), 90° square-bit (B-type), and throwaway-insert boring cutters (T/C-type). Cutters/bits are sold separately.
Ideal for CNC milling centres (on a BT/NT/HSK holder), manual milling machine work, fine-finish boring, bearing bore fitting, jig boring, and toolroom one-offs where a clean finish and precise diameter are required.

Condition

New (Unused).

This ABH-23 is brand new and unused. The body shows no shop wear, the adjustment mechanism turns smoothly through its full range with the expected crisp detent feel, and the bit clamp screw operates correctly. Straight onto a holder and into the spindle.

Boring bars, tool bits, and throwaway cutters are sold separately and are not included — source these to suit your intended bore range and finish requirements.

Included:

1 x KKS ABH-23 Fine Boring Head (body)
2x braised carbide cutting tips
1x HSS blank

Brand Information

KKS (Kyushu Kikai Seisakusho) is a long-established Japanese precision tooling manufacturer specialising in boring heads, facing heads, and related milling tool-holders. Their ABH fine-boring head series is widely distributed throughout Asia and Europe and is considered a benchmark for precision fine-boring on manual mills and CNC machining centres — often specified alongside better-known names like BIG Kaiser and Wohlhaupter for similar work. A KKS boring head in the drawer is the mark of a shop that cares about bore finish and repeatable diameters, not just ballpark hole sizes.

Specifications

Feature	Specification
Brand	KKS (Kyushu Kikai Seisakusho)
Model	ABH-23
Shank	32mm
Type	Fine Adjustable Boring Head
Series	ABH Fine Boring Series
Adjustment Graduation	0.05 mm direct reading
Fine Adjustment	~0.01 mm via vernier interpolation
Compatible Cutters	60°/90° square-bit and KKS-pattern throwaway boring cutters (sold separately)
Mount	Compatible with KKS ABH shank/holder system (check your interface)
Country of Origin	Japan
Condition	New — Unused
Included	Boring head body, 2 carbide cutting tips 1 HSS blank

Keywords

KKS ABH-23, KKS boring head, KKS fine boring head, Japanese boring head, ABH23 fine boring, KKS ABH series, machining centre boring head, VMC boring head, precision boring tool, Kyushu Kikai boring head, fine adjustable boring head, toolroom boring head

Mitutoyo 150mm Digital Calipers 500-181-30

Product Overview

The digital caliper is the single most-used measuring tool on any shop floor — and cheap knock-offs are the single most common source of bad measurements in any workshop. The Mitutoyo 500-181-30 is the fix: a 150mm Absolute Digimatic caliper that’s been the industry reference in its class for years. ABSOLUTE encoder technology means it never loses its origin — switch it on and it already knows where zero is, no re-zeroing every time it goes back in the drawer. Add Mitutoyo’s famous glide action and sub-thou resolution and you’ve got a tool that’ll outlast three generations of budget calipers. Brand new, factory sealed.

ABSOLUTE (ABS) scale technology — caliper remembers its origin point, so there’s no need to re-zero after power-off or battery change.
0-150mm range with 0.01mm resolution and inch/metric switching at the press of a button — covers the vast majority of bench measuring tasks.
Accuracy ±0.02mm across the measuring range — genuine metrology-grade accuracy, not the ±0.04mm you’ll see on cheap imports.
Long battery life (approx. 3.5 years of normal use) thanks to low-power ABS encoder design.
Ideal for general machining, toolmaking, fitting, QC inspection, sheet metal work, and any application where a reliable, repeatable digital reading matters.

Condition

New (Factory Sealed).

This 500-181-30 is brand new, unopened, and still in its original factory-sealed Mitutoyo packaging. The caliper has never been handled — tamper seals intact, genuine Mitutoyo hologram authentication present (a useful thing given the volume of counterfeit Mitutoyo calipers circulating online). Battery, inspection certificate, and user manual are all present inside the original fitted case. Ready to go straight onto the bench.

Included:

1 x Mitutoyo 500-181-30 Absolute Digimatic Caliper, 0-150mm
Original fitted case
Inspection certificate
User manual / papers
Battery (installed)

Brand Information

Mitutoyo is the benchmark in global precision metrology — founded in Tokyo in 1934 and now the default specification on engineering drawings worldwide. The 500-series Absolute Digimatic caliper range, introduced decades ago, effectively defined what a professional digital caliper should be, and remains the tool that every other manufacturer benchmarks against. Buying a genuine, sealed Mitutoyo 500-181-30 means you’re getting real ABS encoder hardware — not a visually-similar clone with inferior internals.

Specifications

Feature	Specification
Brand	Mitutoyo
Model	500-181-30
Type	Absolute Digimatic Vernier Caliper
Series	500 Series (AOS Absolute)
Measuring Range	0 – 150 mm
Resolution	0.01 mm
Accuracy	±0.02 mm
Scale Technology	ABSOLUTE (ABS) electromagnetic induction
Battery	SR44 (installed) — approx. 3.5 years life
Jaw Type	Standard OD / ID / depth / step
Country of Origin	Japan
Condition	New — Factory Sealed
Included	Caliper, fitted case, inspection certificate, manual, battery

Keywords

Mitutoyo 500-181-30, Mitutoyo digital caliper, Mitutoyo 150mm caliper, Absolute Digimatic caliper, 500 series caliper, ABS digital caliper, genuine Mitutoyo caliper, machinist digital caliper, precision vernier caliper, Mitutoyo 500-181, new Mitutoyo caliper

Mitutoyo 12-16mm 3 Point Hole Micrometer

Product Overview

Measuring small bores to genuine micron-level accuracy is one of the hardest jobs in the toolroom — and it’s exactly where the Mitutoyo Holtest earns its reputation. Unlike two-point bore gauges that rely on operator rocking to find the true diameter, the 3-point Holtest uses three self-centring anvils spaced at 120° to lock onto the bore axis automatically, giving you a repeatable reading every single time. In the tight 12-16mm range, this is the go-to tool for small hydraulic bores, precision bushing fits, valve guides, and injector bodies. This one also comes bundled with a reputable SK Japan 12mm setting ring — meaning you can zero and verify the mic right out of the gate.

True 3-point self-centring via three TiN-coated anvils at 120° — automatically aligns on the bore axis with no operator feel required.
0.005mm graduation on the thimble for direct micron-level reading without interpolation.
Titanium-nitride coated contact points resist wear and galling far better than bare steel — keeps accuracy over years of use.
Ratchet stop delivers consistent measuring force, eliminating operator-induced error between readings.
Includes SK 12mm setting ring (guaranteed to 0.0004mm accuracy) — use it to zero the mic and periodically verify calibration in-shop.
Ideal for valve guide inspection, small hydraulic bores, precision bushing ID, injector components, and any tight-tolerance small-bore work.

Condition

Used (Good Working Condition / No Case).

Honest write-up here: this Holtest has been used — it’s not a shelf queen. Mechanically everything is sound: the three anvils extend and retract cleanly, the ratchet stop clicks properly, and the thimble turns smoothly throughout its range. The TiN-coated contact points show their characteristic gold colour with no visible wear-through or chipping. Cosmetic patina is consistent with shop use — some handling marks on the thimble and body — but nothing that affects function. No fitted case is supplied with this listing. Store it carefully or source a generic foam case to protect the anvils in transit. As always with used mics, we recommend zeroing against the supplied setting ring before first use.

The bundled SK Japan 12mm setting ring is a bonus here — SK (Niigata Seiki) is a Japanese metrology brand sitting in the same tier as Mitutoyo for reference gear, and the stated ±0.0004mm tolerance means you’ve got a legitimate calibration reference to go with the mic.

Included:

1 x Mitutoyo 3-Point Internal Micrometer (Holtest), 12-16mm, 0.005mm graduation
1 x SK (Japan) 12mm Setting Ring — accuracy within 0.0004mm

Not included: Original case

Brand Information

Mitutoyo is the global standard-bearer in precision metrology — founded in Tokyo in 1934 and the name that appears on virtually every serious toolroom bench in the world. Their Holtest three-point internal micrometer line has been the benchmark for small-bore measurement for decades; when engineers specify “3-point bore mic” they almost always mean a Holtest. The SK-branded setting ring supplied with this lot is from Niigata Seiki, another respected Japanese metrology manufacturer whose reference standards are widely used in Japanese industry for calibration and gauge verification.

Specifications

Feature	Specification
Brand	Mitutoyo
Type	3-Point Internal Micrometer (Holtest)
Model Family	Series 368 (Holtest)
Measuring Range	12 – 16 mm
Graduation	0.005 mm
Accuracy	±3 μm
Measuring Method	3-point self-centring (anvils at 120°)
Contact Points	Titanium-nitride (TiN) coated
Measuring Depth	≈ 80 mm
Force Control	Ratchet stop
Country of Origin	Japan
Setting Ring	SK (Niigata Seiki) 12mm, accuracy ±0.0004mm
Condition	Used — Good Working Order
Included	Holtest mic, SK 12mm setting ring
Not Included	Case

Keywords

Mitutoyo Holtest, Mitutoyo 3 point bore micrometer, 12-16mm internal micrometer, Mitutoyo 368 series, 3 point hole micrometer, small bore micrometer, Mitutoyo internal mic, SK setting ring, Holtest 12-16, self-centring bore micrometer, precision bore micrometer, TiN coated bore mic

Kanetec MB-B Magnetic Base

Product Overview

Every machinist knows the frustration of a cheap magnetic base that sags, drifts, or lets go halfway through a tram — turning what should be a two-minute indicator check into a fight with the tool. The Kanetec MB-B is the Japanese industry-standard fix for that problem: a pure-cobalt magnet base with an on/off switch, V-grooved pole face, and a rigid articulating arm built to hold a dial indicator exactly where you put it. As new-old-stock, this one has spent its life in a drawer rather than on the shop floor, so you’re getting a current-production Kanetec at a better price than the retail box without sacrificing a day of service life.

On/Off switchable magnet with approx. 80 kg (176 lb) holding force — grabs a surface plate, machine column, or lathe bed and doesn’t let go until you tell it to.
V-groove pole face lets you mount confidently on curved surfaces like round columns, shafts, and pipes — not just flat steel.
Articulating arm with fine-adjust for dialling in indicator position to the thou without fighting the geometry.
Accepts standard 6mm and 8mm dial indicator stems — compatible with Mitutoyo, Starrett, Mahr, and every common indicator on the market.
Ideal for tramming mill heads, setting up work on surface plates, checking runout, indicating vices square, and general QC/inspection work.

Condition

New Old Stock (Unused / Minor Storage Scuffs).

This MB-B has never been used in service — it’s been sitting in its original factory box for some years. Being honest about it: there are some light scuffs and handling marks on the body that come with long storage rather than anything resembling shop wear. The magnet function, on/off lever, arm joints, and clamping hardware are all as-new and operate smoothly. No rust, no bent arms, no missing hardware. For anyone after a genuine Kanetec magnetic base without paying full current retail — and without worrying about a clapped-out flea-market unit with a weak magnet — this is a clean option that’ll give decades of service.

Included:

1 x Kanetec MB-B Magnetic Base with articulating arm
Original Kanetec box
Original documentation / papers

Brand Information

Kanetec Co., Ltd. is the dominant Japanese manufacturer of magnetic tooling for the machining and metrology industries, and has been the default choice for toolroom magnetic bases in Japanese workshops for decades. Their MB-series bases are widely considered the benchmark in the category — known for consistent holding force, long-term mechanical integrity, and a level of build quality that cheaper knock-offs simply can’t match. If you’ve ever used a “no-name” magnetic base that drifts under indicator pressure, switching to a Kanetec is an immediate and obvious upgrade.

Specifications

Feature	Specification
Brand	Kanetec
Model	MB-B
Type	Switchable Magnetic Base / Dial Indicator Holder
Magnet	Pure cobalt, on/off switchable
Holding Force	Approx. 800 N (≈80 kg / 176 lb)
Pole Face	V-grooved (suits flat and cylindrical surfaces)
Indicator Mount	6mm and 8mm clamping holes
Arm Type	Articulating with fine adjustment
Country of Origin	Japan
Condition	New Old Stock — Unused, minor storage scuffs
Included	Magnetic base, original box, original paperwork

Keywords

Kanetec MB-B, Kanetec magnetic base, dial indicator holder, magnetic indicator stand, Japanese magnetic base, switchable magnetic base, machinist magnetic base, on/off magnetic base, NOS Kanetec, V-groove magnetic base, toolroom magnetic base, dial gauge stand

Sokkisha Co 250mm Precision Machinist Level

Product Overview

When you’re commissioning a machine tool, dialling in a lathe bed for twist, or levelling a surface grinder, you need a precision level with a vial sensitive enough to pick up deviations no builder’s spirit level could dream of catching. This Sokkisha 250mm Precision Machinist Level is a heavy, solidly-built Japanese engineer’s level from one of the country’s most storied precision instrument makers — the firm that became Sokkia (now part of Topcon). It’s the sort of shop tool that gets passed down a generation, and at this size it sits in the sweet spot for general machine installation and geometry checks.

250mm lapped steel base — enough bearing length to read machine ways, bed surfaces, and fixture plates reliably without being unwieldy.
High-sensitivity main vial for detecting minute deviations invisible to trade-grade levels — the bread and butter of machine tool alignment work.
Solid cast body with heft that sits flat and stays put during readings, rather than skating around on a greased way.
Ideal for lathe bed levelling, milling machine commissioning, surface plate installation, machinery rebuilds, and millwright/fitter work.
Japanese-built by a maker with a century-long reputation for precision metrology and surveying instruments.

Condition

Used (Good Condition / Functional with Minor Cosmetic Flaws).

Full transparency on this one: the plastic cover that shrouds the glass bubble vial has a small superficial crack. It’s cosmetic only — it does not penetrate through to the glass capsule itself, the vial is intact, and the bubble reads and moves freely. No impact on function or accuracy. The base surface shows some light scratches from shop use, but they’re so shallow you can barely catch them with a fingernail — nothing that would compromise seating on a reference surface or affect a reading. The body has been kept well oiled by the previous owner, which is exactly what you want to see on a used Japanese precision tool: no rust bloom, no pitting, just honest patina. Stored in its original fitted wooden case, which has protected it properly over the years. A straightforward, functional shop-floor level at a sensible price compared to a new equivalent.

Included:

1 x Sokkisha 250mm Precision Machinist Level
Original fitted wooden storage case

Brand Information

Sokkisha Co. was founded in Tokyo in 1920 and grew to become one of Japan’s most respected names in precision measuring and surveying instruments — credited with developing Japan’s first automatic level. The company rebranded to Sokkia in the early 1990s and was acquired by Topcon in 2008, but vintage Sokkisha-stamped tools from the pre-1990s era are recognised by toolmakers and millwrights as cream-of-the-crop Japanese precision kit. A Sokkisha level is a serious piece of industrial heritage that still earns its keep on the shop floor.

Specifications

Feature	Specification
Brand	Sokkisha Co. (later Sokkia / Topcon)
Type	Precision Machinist Level
Nominal Length	250mm
Base	Lapped steel, flat reference surface
Vial	Glass bubble capsule (intact, fully functional)
Country of Origin	Japan
Condition	Used — Good / Functional
Known Flaws	Superficial crack in plastic vial cover (does not affect glass capsule or function); light base scratches
Included	Level, original fitted wooden case

Keywords

Sokkisha precision level, Sokkisha 250mm machinist level, vintage Japanese engineers level, Sokkia machinist level, precision engineers level, machine tool level, lathe bed level, fitter’s level, millwright level, vintage Sokkisha, Japanese precision metrology, surface plate level